Two-channel oscilloscope and digital multimeter for EV diagnostics.
OM201 combines a two-channel oscilloscope and a multimeter for vehicle electrical measurements. It can save and review waveforms with a compatible SmartSafe terminal.
Key benefits
Two channels
Analyze two signals and use manual, tracking or automatic cursors.
Multimeter
AC/DC voltage and current, resistance, diode and continuity functions.
Saved waveforms
Save waveforms locally and review them later.
Workshop functions
Two simultaneous signals
Two scope channels allow signal comparison, with normal, peak-detect and averaging acquisition.
Waveform measurements
Automatic measurements include peak-to-peak, average, minimum, maximum, frequency and period. Cursors support manual, automatic and tracking measurements.
Record and replay
Save waveforms locally, replay them and compare them with later readings.
Multimeter functions
Measure AC/DC voltage and current, resistance, diodes and continuity. Observe the ranges and permitted inputs for the connected probes.
Terminal connection
Wired and wireless links are supported with compatible P01, P03, ST10 or ST13 terminals.
Technical specifications
| Parameter | Value |
|---|---|
| Scope channels | 2 |
| Bandwidth | 10 MHz |
| Max. sampling | 100 MS/s |
| Record depth | 1 M |
| Timebase | 1 µs/div–10 s/div |
| Vertical sensitivity | 2 mV/div–5 V/div |
| Vertical resolution | 8 bit |
| Scope maximum input | 40 V peak |
| Meter DC/AC voltage | ±600 V |
| Meter DC/AC current | ±10 A |
| Resistance | 0–6 MΩ |
| Battery | 3100 mAh / 3.8 V |
| Dimensions | 160 × 195 × 42 mm |
Before use
The oscilloscope maximum input (40 V peak) differs from the multimeter voltage range (±600 V). A compatible terminal is required for display.
